|
# |
Part Description |
| 1 |
Bolt |
| 2 |
Hand Guard |
| 3 |
Rear Guard Screw |
| 4 |
Front Guard Screw |
| 5 |
Lower Band Screw |
| 6 |
Upper Band Screw |
| 7 |
Stock |
| 8 |
Receiver |
| 9 |
Trigger Guard |
| 10 |
Lower Band |
| 11 |
Upper Band |
| 12 |
Rear Sight |
| 13 |
Barrel |
| 14 |
Front Sight |
| |
|
|
|
|
Disassembly
Instructions |
|
|
| 1)
Make sure the rifle is pointed in a safe direction and is
unloaded.
Press the trigger forward.
|
|
|
| 2)
Remove the bolt and set aside. |
|
|
| 3)
Loosen the screw from the upper band as shown in figure
3. |
|
|
| 4)
Remove the upper band screw. |
|
|
| 5)
Slide the upper band forward. |
|
|
| 6)
Loosen lower band screw. |
|
|
| 7)
Remove lower band screw. |
|
|
| 8)
Loosen (only - do not remove) the lower band swivel screw. |
|
|
| 9)
Slide lower band forward. |
|
|
| 10)
Slide the handguard forward. |
|
|
| 11)
Remove the handguard and set aside. |
|
|
| 12)
Unscrew the trigger guard rear screw. |
|
|
| 13)
Remove the trigger guard rear screw. |
|
|
| 14)
Unscrew the trigger guard front screw. |
|
|
| 15)
Remove the trigger guard front screw. |
|
|
| 16)
Remove the trigger guard and set aside. |
|
|
| 17)
Remove the barrel and receiver assembly from the stock.
|
|
|
| 18) Figure
18 shows the disassembled carbine. |
|
|
| 19)
Place barrel and receiver assembly back into the rifle
stock. |
|
|
| 20) Replace
trigger guard. |
| Reassembly Instructions |
|
|
| 21)
Install the trigger guard front screw. |
|
|
| 22)
Install the trigger guard rear screw. |
|
|
| 23)
Tighten trigger guard front screw. |
|
|
| 24)
Tighten trigger guard rear screw. |
|
|
| 25)
Slide the handguard to the rear (as shown in figure
29). |
|
|
| 26)
Slide the lower band back into place. |
|
|
| 27)
Insert the lower band screw. |
|
|
| 28)
Tighten the lower band screw. |
|
|
| 29)
Tighten the lower band swivel screw. |
|
|
| 30)
Slide the upper band back into place. Make sure bayonet lug
is on bottom. |
|
|
| 31)
Return the upper band screw. |
|
|
| 32)
Tighten the upper band screw. |
|
|
| 33)
Reinsert bolt to receiver. |
|
|
| 34)
Push bolt forward and lock into closed position. Carbine
is now reassembled. |
File Downloads
