 |
 |
 |
 |
|
Click on any
of the images below to see a larger version of the image. |
|
Disassembly
Instructions |
 |
1) Using a punch and tap out the firing
pin retaining pin. You may have to really whack the pin to get
it to come out. |
|
2) Remove the firing pin retaining pin. |
|
3) Remove the firing pin. |
|
4) Remove the extractor. |
|
Reassembly
Instructions |
|
5) Snap the extractor back onto bolt body. |
 |
6) Make sure the extractor channel is positioned
as shown in figure 6. |
 |
7) Reinsert the firing pin. Make certain
that the firing pin is positioned inside the bolt so you can slide
the firing pin retaining pin into the bolt body. |
 |
8) Insert the firing pin retaining pin. |
 |
9) Using the blunt side of a punch, lightly
tap the firing pin retaining pin so it is completely seated. |
