     |
|
|
|
Adobe PDF
Downloadable Version of Article |
|
|
|
Loading
Operations |
|
 |
| The TT-33's magazine holds 8
cartridges. |
|
 |
| Press down on the magazine follower with the rear of
a cartridge. |
|
 |
| Load the magazine one cartridge after another. |
|
 |
| Insert the loaded magazine into the magazine well. |
|
 |
| Press the magazine in until is snaps into place. |
|
 |
| While pointing the pistol in a safe direction, pull back on the
slide and let it slide fully forward. |
|
Magazine
Removal and Unloading
|
|
 |
|
Depress the magazine release and pull the magazine out of the
magazine well. |
|
 |
|
While pointing the pistol in a safe direction, pull back on the
slide and eject the cartridge. |
|
 |
|
Visually inspect chamber to make sure it is empty and safe. |
|
Manual Slide
Stop Operation |
|
 |
| The picture above shows the direction and place to push upwards on
the the slide stop to lock open the slide. |
|
 |
| The slide will stay open after the last fired cartridge casing is
ejected from the port. You can manually lock the slide back without
having a magazine loaded. The picture above shows the slide stop in
its lower unlocked position. |
|
 |
| Pull the slide to the rear and manually push up on the slide stop
until the slide locks open. |
|
 |
| To unlock the slide just
pull down on the slide stop. |
|
 |
| Allow the slide to slide forward. |
|
Safety Operation |
|
 |
| The TT-33 Pistol's safety lever has two positions. The
picture above shows the lever in the "Safe" position. |
|
 |
| The picture above shows the lever in the 'Fire" or "Off" position. |
| |
|
Adobe PDF
Downloadable Version of Article |
| |
