2)
Safety must be off or in the "F" position
for takedown
3)
Depress the magazine release and remove the
magazine. Make certain the rifle is unloaded
before proceeding.
4)
Full picture of the bolt body.
5)
Rotate the bolt head 2 clicks left while
holding in this position and pull the bolt
head from the bolt body.
6)
Rotate the firing pin holder until the
firing pin holder and
firing pin apparatus slides free.
7)
Figure 7 shows firing pin, firing pin spring
and firing pin holder removed.
8)
Figure 8 shows all components of bolt body
disassembled reassembly of bolt body.
9)
Figure 9 shows bolt head and bolt body
together with the rollers locked out,
preventing reinsertion into the receiver.
10)
Figure 10 shows how to insert a flat
screwdriver into the lands on the bolt head.
Insert the screwdriver with the bolt head
still in its "loose" position and turn 2
clicks clockwise. The bolt head and bolt
body will be separated, allowing the bolt
body to be dropped back into the receiver.
11)
Figure 8 shows the bolt head and bolt body
with the required gap between the 2
illustrated. "1" is the gap, "2" is the
rollers.
