|
|
|
 |
|
|
|
Article Published
Date: 03/31/2008 |
|
|
| Article by R. Ted Jeo |
| |
|
Adobe PDF
Downloadable Version of Article |
|
|
|
I recall when we were stationed in
Germany in the 1970’s seeing West German polizei
armed with submachine guns walking through the Frankfurt
airport or manning traffic stops along the autobahn we
used to drive. I did not pay all that much attention to
them, neither the polizei or the weapons they
were carrying.
Then I remember being interested in
a certain submachine gun sized firearm that was deployed
with the SAS on May 4th, 1980. The date the
SAS raided and ended the hostage crisis at the Iranian
Embassy in London. You probably have seen the video and
the stills of the black clothed SAS men on the balcony
of the building, the blasting out of the window and the
subsequent attack into the building. Since then, you
could say I really wanted one? Well you could say
it…but it would never happen.
Something changed. Just after
Christmas last year, while lazily leafing through a copy
of Shotgun News I happened upon a color add of an
MP 5. Okay, sure, these ads are always in SGN…but in
reading it closely, I noted that it was a .22 version of
the famed terrorist killer. Hmmm…once again, I figured
it would be out of the budget range. After all, if a
standard caliber (9mm) MP5 was running upwards of $1500+
for a CLONE…well, a .22 version had to be serious money
as well. Keep that thought for a moment….
I searched the web,
found that actually these .22 copies were being made in
Germany by a company called “German Sport Guns” (GSG)
and imported to the U.S. by American Tactical Imports (ATI).
And their copy is impressive in my eyes. Take a look at
the comparison of technical data to real MP5 in 9mm. |
|
GSG-5 Technical Data |
|
Caliber: 22LR
Weight: 6.6 lbs
Width: 2 inches
Height: 10 inches
Length overall: 33.7 inches
Sight radius: 13 inches
Barrel length: 16 inches, 6 grooves
Magazine: 10 or 20 rds
Semi auto mode |
|
|
|
|
MP5 (A2 fixed stock) |
|
Caliber: 9mm Parabellum
Weight: 5.6 lbs
Width: 2 inches
Height: 10 inches
Length overall: 27 inches
Sight radius: 13 inches
Barrel length: 9 inches
Magazine: 15 or 30 rds
Semi auto or full auto (some models have
selective 3 round burst) |
|
|
As you can see, they are pretty
dang close to each other. To scratch the MP5 itch that
I had, I ordered one from
Scottsdale Gun Club who said that it would be late
February when the order would be filled. Turned out it
was shipped out a lot sooner. |
 |
|
Figure 1 |
|
GSG-5 |
|
|
The GSG-5 came semi-assembled.
You’ll have to put on the buttstock yourself. A matter
of fitting one screw through the stock and receiver.
Man, did it look good! It felt good. Now, mind you, I
have never handled a real MP5 except those clone copies
one sees at some gun shows here and there, so I cannot
with 100% accuracy say that it feels “just like” a real
one. But I can tell you that it does just plain has a
great ergonomic feel to it. It shoulders straight up,
sights are easy to use, using the HK ghost ring types
with a front post. And, of course, it has a serious
“coolness” factor to it.
The operation of the
rifle is, as far as I can tell, the same as a standard
MP5. It does not use the HK roller bolt technology as
seen on a real MP5, but then again, it does not need it
for a .22 blow back design. It has the forward charging
(cocking) handle that we all like to see slammed down in
the movies. It has the large paddle magazine release
paddle at the front of the trigger, easy to get to from
either side. There is a large ambidextrous safety
switch (marked F and S) that can be reached with either
your thumb or forefinger on the other side. I did find
the switch was somewhat difficult to reach with my thumb
because of where the pistol grip is, but it was not the
end of the world. If you happen to have bigger thumbs,
more power to you. |
|
|
| Video |
Format |
Size |
|
Video
1 |
Windows Media |
1.27 MB (1,336,907 bytes) |
|
Video
2 |
Windows Media |
1.44 MB (1,516,125 bytes) |
|
Video
3 |
Windows Media |
2.13 MB (2,240,512 bytes) |
|
Video
4 |
Windows Media |
1.39 MB (1,458,519 bytes) |
|
|
|
 |
|
Figure 2 |
| Imported by ATI, the rifle comes as
two parts. You have to install the
buttstock with one cross bolt. |
|
|
|
 |
|
Figure 3 |
|
A big ambidextrous safety switch is easy
to use, easy to read, but can be bit hard to
reach with your hand wrapped around the
grip. You can use your index finger
instead. That seemed to work well for me.
|
|
|
|
 |
|
Figure 4 |
|
The large paddle magazine release is
large and ambidextrous as well. Just
squeeze it and it releases the magazine. |
|
|
The 16 inch barrel is made of what
appears to be in the white steel. When you take off the
fake silencer (actually a barrel shroud) you can see it
is a pretty plain jane .22 barrel. You can leave the
shroud off, but it does not look right then. |
 |
|
Figure 5 |
|
The barrel shroud hides a relatively thin
barrel. Not stainless I think but some
metal in white. |
|
|
The pistol grip and trigger group
is plastic, which, I believe the real MP5 is as well. I
am, however, fairly certain that it is not made of the
same plastic glass reinforced material like the MP5 is.
The grip thickness and angle are comfortable and easy to
hold on to. The trigger itself is about 3/8” wide and
is what I would call “semi” 2 stage. It has a fairly
long pull until you reach the release point. Breaking
at around 5 pounds or so, it is not a target affair.
But then again, it is not billed as one. |
 |
|
Figure 6 |
|
Like a real MP5, a lot of this carbine is
made of plastic. The trigger group lower is
made of a thicker type of polymer than the
buttstock and fore grip. It feels solid
enough. |
|
|
The sights are like your standard
MP5 types. The rear sight drum that has a V notch and
then three apertures of varying sizes. Sight picture
is a rear aperture and a front fairly large/wide post.
I use an aiming style where I make the front ring
(protector) around the post match the rear aperture.
Here is one disappointing item on the carbine; the rear
drum is made of plastic! You would have thought…. |
 |
|
Figure 7 |
|
A disappointment for the cost, the rear
drum is black plastic. The sight has 4
apertures to choose from and can be adjusted
for windage. The receiver has the top
grooves for mounting of scopes and
electronic sights. |
|
|
|
 |
|
Figure 8 |
|
The front sight is a large post with a
protective ghost ring around it. It is easy
to see but may obscure smaller targets. |
|
|
The charging handle operates like
the real thing. On the left side, pull back on the
handle and, if a loaded magazine is in place, let it fly
forward to load the gun. Or there is a notch to lock it
back, that way you can look really cool slamming your
hand down on it when you want to charge the gun, like in
the movies. The gun does have a magazine safety and the
bolt stays open after the last shot. |
 |
|
Figure 9 |
|
Pull back and let fly forward to charge
the rifle. It takes some getting used to as
the lever is toward the front and on the
left side. |
|
|
|
 |
|
Figure 10 |
|
You can lock back the action by moving
the charging handle up into its locking
notch. If you want to be cool, you can
“slam” your hand down and let the handle fly
forward to charge the rifle. Now why would
you want to do that……….(!) |
|
|
The receiver and charging
mechanisms are metal and have a nice solid feel to
them. Having said that, the fore stock and the butt
stock have a cheap plastic feel to them. More so than
the plastic polymer that you find on AR or FAL type
plastic. HOWEVER, as I surf the web, I am finding out
that replacements are available for nearly anything on
the gun, stocks, sights, and attachments. It appears
that a lot of the higher end MP5 AIRSOFT accessories
will fit or can easily be adapted to the GSG5. Being
that this article is a preliminary introduction to the
carbine, I will not go into that discussion much
farther, instead, I would point you in the direction of
various forums and such on the web that have sprung up
regarding the GSG5. (Google GSG5)
But can it shoot?
I ran it out to the range with the
type of ammo that you would want to shoot a large
capacity semi auto with, that is CHEAP ammo that you buy
in bulk. As per the manufacturer’s manual, I stayed on
the hotter side of .22 loads for the most part.
It was cold here the day I went
out. Cold enough that you would want to keep your
gloves on as much as possible. This is one thing where
this little carbine excels at. The designers of the
magazine were very kind to us fumble fingered cold
weather shooters. You can actually load this .22
magazine with gloves on. The magazine has a very large
and easily accessible spring holder that is
ambidextrous. Large enough to hold down easily with a
gloved hand. Too bad the .22 shells are so small I DID
have to remove that glove or else risk dumping shells
all over the place. The polymer magazine (of which
there will be extra ones for sale soon in 10 and the
standard 20 round makes) is solid and takes 20 rounds
easily in a single stack. The rifle comes with one 20
round magazine. One recommendation I would have for you
is to order a couple of extra mags. At $35-$40 a pop,
they are not cheap though. |
 |
|
Figure 11 |
|
The large nut on the magazine makes it
easy to compress the spring and load the
mag. You can even wear gloves doing it.
However, picking up the .22 ammo with gloves
leaves something to be desired. |
|
|
|
 |
|
Figure 12 |
|
All the ammo types worked…EXCEPT the Aguila
Gold Eagle. Not enough blow back power,
this ammo led to all sorts of problems with
failure to feed and non cycling bolts. |
|
|
I tried out the following types of ammo:
Remington 22 Thunderbolt
CCI standard velocity
Federal Match Auto (AM22)
Federal American Eagle
Federal Value Pack (745)
Aguila Gold Eagle Target |
|
All of the above ammo types fires
with no function issues, EXCEPT the Aguila Gold Eagle
target. I figured that this ammo has a couple of things
that the GSG5 does not like. First off, it has a more
waxy lube on the bullet that may contribute to it not
wanting to be chambered properly. Secondly, more
importantly, this is a target load which just does not
seem to have the power to cycle the bolt properly. It
short strokes for nearly every shot. As with the
directions in the owners manual, stay with the high
velocity ammo and you should be fine. |
 |
|
Figure 13 |
|
The 9 ring in this photo is 4” across.
All 40 shots are within this circle. 25
yards, unsupported offhand (wearing gloves
no less). |
|
|
Accuracy for this type of carbine
was pretty darn good. Of the two clips (40 shots) that
I pumped through the rifle for accuracy testing, I could
easily keep all shots inside a 6 inch circle and, in
fact, I was able to keep nearly all shots within
a 4 inch circle at 25 yards, from an unsupported off
hand position. For grins, I moved up to about 10 yards
from the target and did some double tapping fun. From
there, a full clip of 20 shots formed a ragged hole
barely larger than a quarter, again, unsupported off
hand firing rapid double tap shots. |
 |
|
Figure 14 |
|
At about 10 yards, I was able to print this
double tapped 20 rounds into a hole slightly
larger than a quarter, unsupported offhand. |
|
|
Take down and cleaning is not a complicated affair. If
you do not want to really strip the gun down and take
out the bolt mechanism, you can use a bore snake as a
cleaner. Matter of fact, even after removing the bolt
mechanism and stock, I would still clean the barrel by
pulling a cleaner from the muzzle end. The reason is
that there are a lot of little springs and gizmo pieces
in and around the chamber area that could get hung up or
be fouled by your cleaning jag going in from the breach
end. I used a .22 bore snake on my barrel while the gun
was complete, and then took the gun apart to clean the
bolt separately. |
 |
|
Figure 15 |
|
The GSG 5 comes with a multi tip screw
driver and a bent chamber brush. |
|
|
|
 |
|
Figure 16 |
|
Begin the takedown sequence by removing the
buttstock and the one receiver screw at the
front of the trigger group. |
|
|
|
 |
|
Figure 17 |
|
At the back end of the rifle, use the
included hex drive and remove the screw
holding the bolt stop in (the silver metal
part). |
|
|
|
 |
|
Figure 18 |
|
Once you have removed the screw, use the
same hex drive and just pull the bolt down
and out. |
|
|
|
 |
|
Figure 19 |
|
Here is the removed bolt stop. The round
hole on the left is the holding screw. The
hole on the right matches the hex end so
that you can pull down on the stop and then
take it out of the gun. |
|
|
|
 |
|
Figure 20 |
|
Next, you can pull up (gun upside down) and
back and remove the trigger group. |
|
|
|
 |
|
Figure 21 |
|
After you have the trigger group off, you
can pull the bolt out of the back. |
|
|
|
 |
|
Figure 22 |
|
The bolt comes out as a group. This is as
far as the manufacturer recommends you take
the rifle down to for cleaning. |
|
|
|
 |
|
Figure 23 |
|
The trigger group is nested in the lower
receiver. The long thin tab sticking out on
the right is the magazine safety. Note the
small spring behind the hammer. There are a
lot of small springs located at various
places on the rifle. |
|
|
|
 |
|
Figure 24 |
|
Looking at the bolt, you can see the two
guide rods and springs that make this a blow
back system. |
|
|
What can you use this carbine for? The manufacturer
writes it up as plinking and varminting. Sure. I would
say it is probably one of the easiest of semi autos out
there to shoot. It shoulders naturally, it sights
easily and it has near zero muzzle raise, making it a
really fun, fast gun to shoot. Current pricing is
around $500 (2008), as they get imported, they are not
cheap. But I do not want people to compare them to your
standard .22 autos like the 10/22. They just are not in
the same shooting experience league. If you gotta just
have an MP5, here is a very good and cheap shooting
(ammo wise) alternative. And, as I mentioned before, a
complete eyeball popping WOW at the range. |
 |
|
Figure 25 |
| |
|
|
|
|
|
|
Adobe PDF
Downloadable Version of Article |
|
|
| |