|
Click on any
of the images below to see a larger version of the image. |
 |
|
Disassembly
Instructions |
 |
1) Figure 1 shows a typical
Type 99 bolt. |
 |
2) Push in on the bolt end
piece and turn it clockwise until it stops. |
 |
3) Pull the bolt end piece
off of the bolt. |
 |
4) Pull pull the striker
and spring out of the bolt. |
 |
5) Set the striker and
spring a side. |
 |
6) Rotate the the extractor
on the bolt until it is out of the groove. |
 |
7) Slide the extractor
forward on the bolt until it is separate. |
 |
8) Remove the spring
from the striker. |
| Reassembly Instructions |
 |
9) Slide the extractor
back onto the mounting ring. |
 |
10) Rotate the extractor
until it rest in the groove on the front of the bolt body. |
 |
11) Place the spring
into the striker. |
 |
12) Place the striker
and spring in the bolt. |
 |
13) The striker needs
to be aligned as shown in figure 13 for the bolt end piece
to be reattached. |
 |
14) Align the lug on the
bolt end piece and slide it into the striker. |
 |
15) Push down on the bolt
end piece and turn it counter-clockwise until it stops. |
 |
16) Figure 16 shows the reassembled
bolt. |
File Downloads
