    
|
|
Sights
|
|
Adjusting the Rifle's
Front Sights
|
|
|
|
Loading w/Stripper
Clip
|
|
 |
|
Place rifle with muzzle
pointing in safe
direction. |
|
 |
|
Open bolt and pull to rear of receiver.
Place clip into guide in top of Mauser receiver.
|
|
 |
|
Push down on clip into grooves as shown
in Loading 3
. |
|
 |
|
Once clip is inserted into receiver, push
down on rounds until they strip off of clip and are loaded
into the magazine as shown in Loading
4
. |
|
 |
|
Loading 5 shows
what the magazine looks like loaded with stripper clip still
inserted. |
|
 |
|
Pull stripper clip out of receiver as
shown in Loading 6 . Close
bolt (this action chambers first round into the chamber) and engage
safety. |
|
Loading Single Rounds
|
|
 |
|
Place rifle with muzzle
pointing in safe direction.
Open bolt and pull to rear of receiver
|
|
 |
|
Insert 5 or less rounds into magazine as
shown in Loading Single Rounds - Loading 2 . Close
bolt (this action chambers first round into the chamber) and engage
safety. |
|
Unloading |
 |
|
From inside the front of the trigger guard, press forward on the
magazine latch. |
 |
|
The magazine is hinged and swings open as shown above allowing
unfired cartridges to be unloaded. |
|
Safety Operation
|
|
 |
|
Safety 1
shows the Mauser safety in the off position. |
|
 |
| Safety 2 shows the
Mauser in the middle position. This position allows for the
opening of the bolt - but does not allow for the trigger to be
pulled. |
|
 |
|
Safety
3 shows the Mauser in the far right - "Safety On"
position. This position does not allow you to open the bolt or
pull the trigger. |
File Downloads
